Amico Store

F405 F405HD / F7 F722 Flight Controller / F4 V3S Plus FC + 60A 4in1 BLheli_S ESC Stacks 30.5*30.5mm For RC FPV Racer Drone

€35,65 EUR

~~€35,65 EUR~~ €35,65 EUR

In offerta Esaurito

Imposte incluse. Spese di spedizione calcolate al check-out.

Color F405 FC and 60A F722 FC and 60A Only F722 FC Only 60A ESC Only F405 FC

Quantità

SPECIFICATIONS

Brand Name: Readytosky

Choice: yes

For Vehicle Type: Airplanes

Four-wheel Drive Attributes: Motors

Hign-concerned Chemical: None

Is Electric: No battery

Material: Composite Material

Model Number: F405 / F722 / F4 V3S Plus Flight Controller + 60A ESC

Origin: Mainland China

RC Parts & Accs: Motor Components

Recommend Age: 14+y

Remote Control Peripherals/Devices: ESC

Technical parameters: Value 5

Tool Supplies: Battery

Upgrade Parts/Accessories: Frame

Use: Vehicles & Remote Control Toys

Package Included: (Send it as your choice, as the option shown)

F4 V3S Plus Flight controller:

Item name: F4 V3 PLUS Flight Controller

Firmware: OMNIBUSF4SD

Size: 36x36mm

Mounting holes: 30.5x30.5mm

STM32 F405 MCU

Dshot support

Drag and Drop OSD configured via Betaflight

MPU: MPU6500 / MPU6000 (Send at random)

SBUS / PPM AND Spketrum DSMX ports

MicroSD card blackbox

Baro (BMP280)

5v3a 9V3A BEC

On-board video filters (only 5V to VTX and camera)

Boasting a F4 processor, on-board Betaflight OSD, MicroSD Black Box, 5v3a sbec, video filter, you'll be tuning pids with your transmitter and

Tear it to the track in no time!

Note:

1. The F4 V3S Plus Flight Controller only support Betaflight software, and we do not suggest to adjust the parameters.

2. There are two kinds of flight controller board, we will ship it at random.

F4 F405 Flight Controller:

Product Parameters:

MCU: STM32F405RGT6 168MHz

Gyroscope: Mpu6500

Baro:Bmp280

OSD: Betaflight SPI OSD DJI HD OSD(UART5)

Black box: 16MB

6x Uarts: UART 1/2/3/4/5/6

4x PWM outputs

1x I2C

2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)

USB Type-C(USB2.0)

1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)

1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)

VTX 9V filtered power

DJI FPV OSD is supported by any spare UART

LED: 4 LED independent pads, support WS2812 programming lamp output.

Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
The default receiver input is UART2(You can solder ELRS RX on UART2).

Power:

Input voltage: 3-6S

BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI

LDO 3.3V: Max.1A

FC Firmware:

BetaFlight firmware: DAKEFPVF405

INAV firmware:DAKEFPVF405

Mounting:

Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation

External size 36mm × 36mm

Flight control weight: 6.9g

Flight control onboard voltage sensor.

F7 Flight Controller Specifications:

MCU: STM32F722RET6 216MHz

Gyroscope: Mpu6500

Baro:Bmp280

OSD: Betaflight SPI OSD DJI HD OSD(UART5)

Black box: 16MB

6x Uarts: UART 1/2/3/4/5/6

4x PWM outputs

1x I2C

2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)

USB Type-C(USB2.0)

1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)

1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)

VTX 9V filtered power

DJI FPV OSD is supported by any spare UART

LED: 4 LED independent pads, support WS2812 programming lamp output.

Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,

The default receiver input is UART2(You can solder ELRS RX on UART2), F7 has a built-in inverter, which can actually be installed in any spare UART.

Power:

Input voltage: 3-6S

BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI

LDO 3.3V: Max.1A

FC Firmware:

BetaFlight firmware:DAKEFPVF722

INAV firmware:DAKEFPVF722

Mounting:

Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation

External size 36mm × 36mm

Flight control weight: 6.9g

Flight control onboard voltage sensor.

BLHeli-S 60A 3-6S DShot600 4-in-1 ESC:

Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal

Power supply voltage: 3-6S (12-26V)

Continuous working current: 60A

No built-in 5V BEC output

Firmware: BLHeli-S

Screw hole spacing: 30.5*30.5MM

Aperture: 4MM

Weight: 14.6g

The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.

- EMI Shell provides stronger anti-interference capability.

Note :There are two kinds of esc board, we will ship it at random.